Kawai K5000 Multi / Multi Bank
----------------------------------------

* Multi - load 1 Multi from the K5000
    - use the PCH# to select the multi
* Multi Bank - load all 64 Multis

* Warning! The K5000 does not use a
  buffer area so in order to audition
  Combis, Multis, or Patches, it is
  necessary to overwrite one of each
  type. When auditioning, the program
  will overwrite Patch A01 and Multi A01

* Match the software's Comm Ch to the
  UNIT Ch on the instrument
  - press the system button
  - press the MIDI button
  - check the UNIT Ch value and match

* Ensure SysX reception is enabled
  - press the system button
  - press the MIDI button
  - press the MORE button
  - ensure that "Exclusive" is on

* turn off memory protect is off
  - press the system button
  - ensure protect is OFF ( in order to
    receive, edit, or audition patches)

* Match the basic MIDI channel to the
  Driver List 'Comm Ch'

* Warning! The K5000 uses dynamic
  memory allocation. When auditioning
  patches from a patch bank, if there is
  insufficient memory to receive the
  patch, it will NOT audition!!

* Warning! The K5000 uses dynamic
  memory allocation. It is possible to
  create a bank of patches that require
  more memory than is available in the
  instrument. In this case, the instrument
  will STOP receiving patches.

* Additionally, there is no command to
  clear the K5000's memory so if you are
  sending a new Patch Bank to the
  instrument under the following conditions:

  a) memory is almost full
  b) the new patches being sent to the
      instrument are larger than the patches
      currently stored in the instrument at
      the same locations

  you will need to manually delete some of
  the patches in order for the instrument
  to properly receive the new bank.